Address: Industry Two Road, Chaobaihe Industrial Zone, Dachang, Langfang City, China
Address: No 3 Fengcheng, Fengcheng Three Road, Xi’an, China
The cutting dryer unit is a key system in drilling waste management, can reduce the oil content of solid particle (≥0.5mm) in drilling waste to less than 5% and moisture content to less than 15%.
The unit is equipped with washer pump, hoisting cantilever, mixer and liquid-phase buffer tank. The washer pump is used for extracting the liquid phase from buffer tank and washes the dryer inside, meanwhile, extracts the clear water outside to clean the equipment after operation. The hoist cantilever can lift the upper cover of cutting dryer, screen basket and objects less than 0.5t, its turning radius is 3.3m and rotation angle is 270°, which can drastically reduce the time of screen basket replacement and maintenance cost. The dryer’s lifting support provides three lifting heights for application and the lowest height level is used for transportation, which can reduce the transportation cost and be easy for assembly and disassembly, and other two height levels are operating positions and use d for different slag discharge ways.
|Model||Treatment Capacity(m³/h)||System |
|System Total Power(kW)||Oil / moisture content after treatment(%)||Separated solid|
|KAMS-SG30||≤30||3.5||77||≤5% / ≤15%||≥0.5|